How to Perform an INAIR Pod Screen Drift Calibration 2026

How Do I Calibrate My INAIR Pod to Stop Screen Drift?

To perform an INAIR Pod screen drift calibration, you must access the specific calibration tool within the INAIR OS settings. Screen drift (where the virtual monitors slowly move to one side or appear tilted) occurs when the IMU sensors in your AR glasses lose their center axis. By placing your glasses on a perfectly flat, stationary surface and triggering the "Glasses Drift Calibration" option in the settings menu, the system will reset the gyroscope, restoring a perfectly stable 3DoF hover experience.

Why Is My Screen Tilted or Pulling to the Right?

A very specific user issue we frequently encounter is: "When I look to the left or right, the glasses lose their calibration and always drift towards the right. Also, the left side of the screen looks deeper or longer than the right, making it tilted."

This is a classic sensor misalignment. Your AR glasses use internal IMU (Inertial Measurement Unit) sensors to track your head movements. When these sensors accumulate tiny mathematical errors over time, or if they are initialized while you are holding them at an angle, the virtual screens will begin to warp and drift.

The Official Step-by-Step Calibration Guide

If your screens are acting up, do not immediately assume the hardware is broken. Follow this exact calibration procedure:

Find a Flat Surface: Take off your AR glasses and place them on a perfectly flat, level table. Do not hold them in your hands, as your micro-movements will ruin the calibration.
Access the Menu: Using your INAIR Pod, navigate to Settings > General (or Display).
Trigger the Calibration: Click on "Glasses Drift Calibration" (眼镜漂移校准).
Do Not Touch: The system will spend a few seconds zeroing out the sensors. Do not touch the glasses or the table during this process.
Test the 3DoF: Put the glasses back on. Your screens should now be perfectly leveled and "nailed" to the air. If the issue persists, our upcoming OTA firmware update includes enhanced background auto-calibration algorithms to prevent this drift permanently in 2026.

Already Relying on Stable 3DoF Every Day?

The INAIR Pod handles this calibration for any compatible glasses you pair it with. For a setup where the Pod and glasses are matched and tuned together from the start, the INAIR 2 Elite Suite is built for exactly that consistency.

A drifting screen is a fixable quirk of sensors, not a sign anything's actually broken. Discover more about what we're building.