Introduction

Thank you for choosing INAIR products. INAIR is a spatial computing terminal specifically designed for mobile office scenarios. We have integrated the functionality of a smartphone, a computer, and six large-screen monitors into a single pair of glasses and a portable host device, enabling you to enjoy mobile office with a lightweight setup while on the move.

• The INAIR smart glasses are equipped with a 135-inch fully private 120Hz Full HD display, boasting a 3840×1080px resolution. Compared to previous models, its immersive visual effect has been upgraded with a 15-inch larger display area, 120% higher brightness, and double the refresh rate.
• It delivers seamless, edge-to-edge clarity—even fine text remains crisp and readable on the large-screen display of this XR glasses. Featuring anti-glare, anti-ghosting, and anti-motion sickness capabilities, it offers an exceptionally comfortable and immersive experience.
• INAIR adopts the latest Sony Micro OLED panel and supports myopia adjustment. Its newly upgraded electrochromic film blocks 99.5% of ambient light, eliminating the need for light-shielding lenses. Certified with Swiss SGS A+, it achieves a visual fatigue index of less than 2.5.
• INAIR supports both mobile and full PC ecosystems, presenting them simultaneously and orderly in space through the AR glasses. Interaction is effortlessly completed via the portable Pod touchpad, making it your ultimate mobile workspace.
• Powered by ultra-linear stereo dual-speaker acoustic technology, it delivers a high-fidelity audio experience.

INAIR Glass Setup & Adjustment

How to Install Custom Lenses
If you already have your INAIR prescription custom lenses, please install the custom lens module onto the nose pad area.

https://cdn.shopify.com/videos/c/o/v/55c8af22920e4711bd158a0509b660dc.mp4

How to Adjust the Nose Pads

INAIR Glass offers three nose pad options (High, Medium, and Low); to adjust, simply pull out the current nose pads from the glasses, insert the replacement ones into the original slots, and press firmly to secure them. 

https://cdn.shopify.com/videos/c/o/v/8714c12fba7b4eccbb56af216c9c7542.mp4

How to Adjust the Temple Arms

The temple arms of INAIR glasses support three-position adjustment (Upper, Middle, and Lower); simply gently bend the temple arms up or down to adjust their height.

https://cdn.shopify.com/videos/c/o/v/3cbb88804d4940e2a2bc9976fc55094a.mp4

Buttons & Controls

Functions

How to Adjust Immersion Level

You can gently slide your finger across the touch control area on the left temple arm—sliding forward for a more immersive experience, and sliding backward for a more transparent view.

https://cdn.shopify.com/videos/c/o/v/09921719bcb145cab23e9c4b14fb5095.mp4

Devices Compatible with the INAIR DP Port

You can connect your INAIR glasses to hardware devices via a Type-C cable, and you can also download the INAIR app for file transfer.

How to adjust the screen layout

Mode 1: Full-Screen Mode

Click the Full-Screen Button to expand the selected window to full-screen view.
To return to the multi-window layout, simply click the button again.

Mode 2: Screen Orientation Mode

Click the Orientation Button to switch between landscape and portrait views.
Please note that some apps only support a single orientation. In such cases, the button will appear gray and be disabled.

Mode 3: Topmost Mode

Activate the Always-on-Top feature by moving your cursor to the center of the window’s top edge and clicking the Top Button.
This will pin the window above all others, keeping it visible at all times for easy multitasking.

How to Connect INAIR Glasses to Your PC

1. Software for Computer Connection

To unlock the full potential of your INAIR Glasses when connected to a computer, we provide two dedicated desktop applications — INAIR Space and INAIR 3D Transform.

• INAIR Space
  Extend your computer’s display into the AR environment, creating multiple virtual screens for efficient multitasking.

• INAIR 3D Transform
  An AI-powered application that converts your 2D computer content into immersive 3D visuals in real time, displayed directly through your glasses.

Before connecting, please download both applications to ensure compatibility and performance.

2. Connecting the Glasses to Your Computer

When connected via cable, the glasses can link directly to your computer.

In this mode, the glasses function as an extended display for your computer.

• INAIR Space supports four split-screen modes, allowing you to display up to four virtual screens simultaneously inside the glasses.

• You can freely arrange these screens to create a highly productive and personalized workspace.

• The display inside the glasses appears in a stereoscopic AR view, providing an immersive yet natural visual experience.
  

INAIR 3D Transform connects in the same way as INAIR Space.

Depending on the mode you choose, the system automatically adjusts depth and smoothing to deliver the best 3D effect in every scenario — no additional hardware required.

How to Connect INAIR Glasses to Your Phone

INAIR Glasses can be connected to your smartphone in two ways — wired connection and wireless file transfer — allowing you to enjoy immersive viewing or easily manage your mobile content.

Wired Connection (Screen Mirroring)

You can directly mirror your smartphone’s display to the INAIR Glasses using a Type-C cable.

Steps:

1. Use a Type-C to Type-C cable to connect your phone to the glasses.
2. Once connected, your phone’s screen will be mirrored inside the glasses automatically. 

Note:
Your smartphone must support Type-C video output (DisplayPort Alt Mode).

Tip: Our glasses require a device with Type-C video output. Since compatibility varies by brand and model, we can’t guarantee every device will work. To be sure, please check your device’s specifications on the official website or with the manufacturer’s support team.

How to Use INAIR Wakey for Remote PC Streaming

🔹 Step 1: Download and Install INAIR Space

Download INAIR Space and install it on your computer.
Before streaming, make sure your computer is powered on and connected to the internet.

Tip: INAIR Space is the official desktop client for INAIR Glass, designed for seamless screen expansion and flexible layouts.

🔹 Step 2: Get the Pairing Code

Open INAIR Space on your computer for the first time.
Log in with your INAIR account — the program will display a wireless pairing code on screen.
Keep this window open; you’ll need the code in the next step.

🔹 Step 3: Pair Your Pod with the Computer

Make sure your Pod and computer are on the same network.
On your Pod, open the INAIR Space App, log in, locate your computer, and enter the pairing code.
Once connected, your devices will remember each other for future sessions.
Tip: After the first pairing, you won’t need to repeat this step next time on the same network.

🔹 Step 4: Enable Remote Streaming with INAIR Wakey

Connect INAIR Wakey to your computer.
After that, your INAIR Glasses and computer are no longer limited to the same network — you can stream remotely anytime, anywhere.

Enjoy your desktop experience on-the-go, powered by INAIR Wakey.（INAIR Wakey is included in:（INAIR 2 Elite Suite ；INAIR 2 Pro Go Pack）

🔸 Notes：
Use a stable network for the best streaming quality.
If your pairing code expires, reopen INAIR Space to refresh it.
Performance may vary depending on your internet speed and latency.

💡 Tip: Remote Streaming Compatibility

Remote cross-network streaming may be limited in certain regions due to local carrier network restrictions.
If you experience connection issues, try switching to a different carrier network.
Our R&D team is continuously optimizing compatibility, and broader remote-streaming support will be available in future updates.

Introduction

INAIR 3D is an AI-powered app that turns 2D content into immersive 3D in real time — no extra hardware needed. Enjoy a new spatial experience across web, gaming, and video.

Download the application

How to install INAIR 3D 

• After downloading the installation package, double-click to open the 3D_Transform file.
• After reading the introduction, click "Continue".

• After reading the setup instructions, click "Continue".

• Setup is complete and ready for installation; click "Install".

How to use INAIR 3D

• You can connect the INAIR Glasses to the computer's USB-C port using the INAIR data cable.
  

How to Enable INAIR 3D

INAIR AI Spatial Rendering Engine

INAIR is powered by the AI Spatial Rendering Engine, delivering groundbreaking real-time INAIR 3D technology.
You can apply INAIR 3D effects to:

• Images
• Videos
• App Interfaces

Method 1: Apply INAIR 3D to Photos & Videos

Step 1: Import Content to the INAIR Pod
You can import photos or videos using:

• Wired connection to your PC
•  Wireless connection to your phone via My Phone

For detailed instructions on how to tranfer, please refer here.

Step 2: Enable INAIR 3D

• Personal photos can be found in Album.
• Personal videos can be found in Space Video.
• Click the INAIR 3D button to start the transformation.
  

To convert local videos:

1. Go to Space Video → Local Videos.
2. Select your video and click INAIR 3D.

Method 2: Enable INAIR 3D for Apps (TikTok, YouTube, Netflix, Disney+, etc.)

Step 1: Open the desired app and click the Full-Screen button.

INAIR 3D for apps is only available in full-screen mode.

Step 2: Click the INAIR 3D button to activate the effect and enjoy a truly immersive experience.

How to Activate the AI Assistant？

The INAIR AI Assistant can be activated in several convenient ways, depending on your device setup.

Method 1: Using the Pod

Press and hold the HOME button on the INAIR Pod for 3 seconds to summon the AI Assistant’s dynamic interface.
Then, speak into the microphone hole located on the top of the Pod — your voice commands will be recognized instantly.

Method 2: Built-in AI Software

The INAIR Pod includes a built-in AI assistant system, preloaded with advanced AI models such as ChatGPT.
You can interact with it directly through voice or text for seamless intelligent assistance.

Method 3: Using the INAIR Touchboard

If you’re using an INAIR Touchboard, simply tap the AI icon on the keyboard to activate the AI Assistant.
Once activated, speak into the Pod’s microphone hole to start interacting.

Method 4: AI Perception Hint (Hands-Free Activation)

Enable AI Perception Hint in the System Settings to enjoy a fully hands-free experience.
When you look toward the screen, the system will automatically detect your intent and summon the AI Assistant to assist you.

Screen Centering & Drift Calibration

If you notice that the display inside your glasses appears tilted, off-center, or misaligned, you can easily correct it using the following functions.

1. Screen Centering

Start by using Screen Centering — this feature quickly realigns the virtual screen to match your natural line of sight, ensuring a comfortable viewing position.

2. Drift Calibration

If the screen still appears misaligned after centering, proceed with Drift Calibration to recalibrate the sensors and stabilize the virtual display.

How to Calibrate

Method 1: Using the Glasses

Double-tap the left front temple of the glasses to instantly realign the screen.

Method 2: Using the Touchboard

If you’re using the INAIR Touchboard, press the dedicated calibration button to realign the in-glasses display anytime.

Advanced Calibration (via Settings)

Step 1:
Open Settings → Display & Sound, then scroll to the bottom and tap “Glasses Drift Calibration.”

Step 2:
Follow the on-screen instructions:

• Remove your glasses and place them flat on a stable surface.

• Ensure they remain completely still.

• On your Pod, tap “Start Calibration” to begin.

Once the process completes, your display should appear perfectly centered and stable again.

Introduction

INAIR Pod is an innovative AR device that integrates an intelligent interaction system, an exclusive operating system, a high-performance computing platform, and is equipped with the INAIR OS. As a platform-level intelligent terminal designed specifically for spatial computing, it empowers users to efficiently schedule and manage multi-task windows in an immersive three-dimensional space. 

How to use INAIR Pod

1.1 Connect INAIR Glasses to Pod

Use the USB-C cable included in the package to connect the USB-C port at the bottom of the Pod to the right temple of the glasses.

1.2 Power on & off

• You can hold down the button on the side of the Pod; after it vibrates, the INAIR logo will appear on the screen.
• You can long-pressing the power button for 3 seconds to access the shutdown window and selecting 'Shutdown'.

Note: If the Pod does not power on, you may need to charge the battery.

1.3  Wake up / Lock & Unlock Pod

When the glasses are taken off, the Pod will turn off the display to save power and enter sleep mode when idle. If you need to use the Pod again, you can quickly wake it up and unlock it.

• After registering your fingerprint, you can place your finger on the power button to unlock the Pod.
• You can press the Pod's power button once to lock the screen.

1.4  Wake up INAIR AI Agent

When the glasses are not connected, for the Pod's voice conversation feature, long-press the Home button on the Pod to activate the AI assistant. Ask questions or voice your requests, and the AI's text responses will show up on the Pod's touchscreen.

 

Buttons & Controls

Functions

How to Set Up the Fingerprint Lock

The INAIR Pod supports the fingerprint lock function. The fingerprint scanner is integrated into the power button, providing enhanced protection for user privacy and security.

Step 1: Open Settings > Password > Enable Password

Step 2: Log In to Your INAIR Account > Set a 4-Digit Password > Add Fingerprint

In addition, INAIR supports multi-fingerprint unlocking. You can add more fingerprints as needed.

How to Transfer Files to the Pod

You have two primary options for transferring files to and from your Pod: Wired Transfer (for speed and stability) and Wireless Transfer (for convenience across multiple devices).

Method 1: Wired Transfer (USB-C)

For the fastest and most stable file transfer, connect the Pod directly to your computer using a Type-C cable.

Operating System	Instructions
Windows	Connect the Pod directly. Your computer will recognize the device and allow you to browse its storage.
Mac	Before connecting, you must download and install Android File Transfer to enable file browsing on your Pod.

 

How to use Android File Transfer

1. Download the app.

2. Open AndroidFileTransfer.dmg.

3. Drag Android File Transfer to Applications.

4. Use the USB cable that came with your Android device and connect it to your Mac.

5. Double click Android File Transfer.

6. Browse the files and folders on your Android device and copy files.

 

Transfer Process: Once connected, navigate to the Pod’s storage drive and transfer your files directly into or out of the main Download folder.

Method 2: Wireless Transfer (Cloud Storage)

Option 1：For convenient file access and synchronization between the Pod and your other devices, use a cloud storage application.

Steps:

1. On the Pod, download a cloud storage application from the app store (such as Google Drive, OneDrive, or Dropbox).
2. Log in to your account.

      3. Use the cloud storage app to seamlessly transfer and synchronize files between            the Pod, your computer, and any other connected devices.

Option 2: Wireless Connection: File Transfer Between Phone and INAIR System

You can easily manage and transfer files between your smartphone and the INAIR system using the INAIR App, without the need for any cables.

Steps:

 1. Download and install the INAIR App on your smartphone.

 

    2. On the Pod, open “My Phone” from the main menu.

  3. In the INAIR App, select and pair the device name displayed on the Pod.

  4. Once paired, you can wirelessly transfer photos, videos, and other files between your phone and the INAIR system with ease.

How to Download Apps to Your INAIR Pod

There are three simple ways to install apps on your INAIR Pod. Follow the steps below to get started.

Method 1: Using the INAIR App Store

1. Open the INAIR App Store on your Pod.
2. Browse or search for the app you want to install.
3. Click “Download” to install the app directly onto your Pod.
4. Once installed, you can find the app in your Pod’s main menu and launch it immediately.
   

Tip: The INAIR App Store is curated for Pod compatibility, so all apps here are optimized for the device.

Method 2: Using Google Play

1. Open the Google Play Store on your Pod.
2. Sign in with your Google account (if required).
3. Search for the app you wish to install.
4. Tap “Install” to download the app to your Pod.
5. After installation, the app will appear in your Pod’s main menu for easy access.

Note: Make sure your Pod is connected to Wi-Fi for smooth downloading and installation.

Method 3: From the Website

1. Open the web browser on your Pod.
2. Navigate to the app’s official website or a trusted download source.
3. Download the app just like you would on a PC.
4. Follow the on-screen instructions to install the app.
5. After installation, you can access the app from your Pod’s main menu.
   

Tip: Only download apps from trusted sources to ensure security and compatibility.

 

How to Delete Apps

1. Navigate to the app you want to remove on your Pod.
2. Press and hold the app icon until the “Delete” button appears.
3. Click “Delete” to uninstall the app from your Pod.
4. The app will be removed, freeing up space on your device.

INAIR Touchboard

Indicator Light

• Bluetooth Indicator Light: Press Fn+B to enable/disable Bluetooth pairing mode. When enabled, the white indicator light flashes rapidly. After a successful connection or when disabling Bluetooth pairing mode, the Bluetooth indicator light goes out.

• Bluetooth Indicator Light (Second entry, likely typo): The keyboard lights up for 3 seconds after powering on and then turns off. When the battery is low, the red light flashes. While charging, the white light stays on, and when fully charged, the green light stays on.

Bluetooth Link

1. 1. Press Fn+B to enter Bluetooth pairing mode and search for INAIR Touchboard to pair and connect.

   2. Press Fn+B again to exit Bluetooth pairing mode.

INAIR Touchboard Fold

Indicator Light

Bluetooth Connection

1. Press [Fn+B] to enter Bluetooth pairing mode, search for “Touchboard Fold” to pair

2. Press [Fn+B] again to exit Bluetooth pairing mode

Product Specifications

Name: INAIR Touchboard Fold；   Model: HB265-T02
Charging Port: Type-C；Battery Capacity: 250mAh
Standby Time: ≥365 days；Operating Current: <7mA
Main Material: PU；Connection Method: Bluetooth
Charging Time: <3h；Charging Current: <190mA
Dimensions: 397.82 × 96.7mm；Weight: 173g

Keyboard Layout

How to Connect the INAIR Touchboard to the Pod

The INAIR Touchboard is more than a traditional Bluetooth keyboard — it’s specifically designed for AR spatial systems, offering seamless control and interaction within your immersive workspace.

Step 1:
Make sure the Pod has Bluetooth turned on.

Step 2:
Power on the Touchboard — the indicator light will turn on.
Then, press and hold the FN and B keys at the same time.
You’ll see the indicator light start flashing, meaning the Touchboard is now in pairing mode.

Step 3:
When the pairing request appears on your screen, select “Connect” to complete the setup.
Once connected, the indicator light will stop flashing, and your Touchboard will be ready to use.