Introduction

Welcome to your INAIR Projection Kit!
This is an immersive 3D audiovisual solution built on spatial computing, integrating INAIR OS, the AI Real-Time Depth Engine, and the INAIR Pod Smart Terminal. It can instantly convert any 2D content into 3D, while supporting multi-user sharing and broad device compatibility, enabling a full-scene 3D viewing experience.

• AI Real-Time Depth Engine 
  Detects scene depth in real time and converts 2D content into 3D with one click, breaking the limitations of traditional 3D sources.
• INAIR Pod Smart Terminal 
  Built-in INAIR OS and high-performance computing platform handle 3D rendering, interaction, and cross-device collaboration, ensuring smooth and stable visuals.
• Multi-User Sharing & Broad Compatibility
  Comes with two DLP active 3D glasses; compatible with DLP-Link projectors — simply plug in via HDMI for multi-user viewing；
  INAIR OS also supports 3D projectors, monitors, and TVs, allowing flexible expansion to more scenarios.

1. Package Contents

• INAIR Pod
• HDMI → USB-C Adapter Cable
• Active Shutter 3D Glasses ×2

2. How to Connect to a Projector

Step 1: Connect the Cable

1. Connect the HDMI output of the projector to the included HDMI → USB-C adapter cable.
2. Plug the USB-C end of the adapter into the INAIR Pod.
   

Step 2: Set 3D Display

• Switch the projector display mode to “Side-by-Side 3D (SBS)”.
• If the projector does not support 3D, it will automatically run in 2D mode — no extra setup is needed.
  

Step 3: Enable 2D → 3D Conversion

• Open any 2D video content in projection mode.
• The INAIR Pod will automatically activate the AI Real-Time Depth Engine.
• No additional setup required.
• Standard videos will automatically be converted into real-time 3D visuals.
• For manual adjustments, you can switch between 2D/3D in the Winbar top control panel.

3. How to Use the 3D Glasses

Wearing the Glasses

• Put on the DLP-Link active 3D glasses.
• Use the mode switch button on the glasses to cycle through until the correct 3D display mode is active.

4. Supported Projector Standards

The INAIR 3D Projection Kit is compatible with DLP-Link projectors:

• Plug in via HDMI → automatically enter 3D playback mode.
• No external emitter or additional accessories required.

Recommendation:
If you are unsure whether your projector supports DLP-Link, please consult the retailer or check your projector manual.

5. FAQ (Frequently Asked Questions)

• Q1: Why don’t I see the 3D effect?
  A:
• Confirm that your projector supports the DLP-Link 3D standard.
• Check that the projector’s 3D mode is set to Side-by-Side 3D (SBS).
• Ensure the DLP-Link 3D glasses are in the correct mode and have sufficient battery.
• Q2: Why is there slight ghosting?
  A: 
• Press the glasses’ sync button again and check that the DLP-Link 3D glasses have sufficient battery.
• If the projector brightness is low, consider dimming the surrounding ambient light.
• Ensure the projector display is set to the correct 3D mode.

Q3: Can all apps be converted to 3D?
A: Yes. The AI Real-Time Depth Engine in the INAIR Pod can instantly generate 3D effects from most online videos.